The Tractive X-TREME rear shock for the KTM 790 ADVENTURE R uses a closed, pressurised design with separated oil and gas to maintain consistent damping and reduce fade under prolonged use. It is a triple-adjustable shock and includes a hydraulic preload adjuster, allowing setup changes without tools. The “TR” variant indicates a ride-height change, so fitment will alter static height compared with standard length.
Design & features
- Closed, pressurised shock with separated oil and gas for stable damping and improved cavitation resistance
- Remote reservoir design
- Spring-equipped rear shock
- Hydraulic preload adjuster fitted for convenient preload changes
Tuning Controls
- Rebound damping adjustment
- Compression damping adjustment
- Additional damping adjustment (triple-adjustable configuration)
- Hydraulic preload adjustment
Who is this for?
- Riders who want broad adjustability to suit load, pace, and varying terrain
- Owners who prefer a pressurised, oil/gas-separated architecture for consistent performance on long rides
- Those needing a rear shock variant that changes ride height
Before You Install
- Confirm the intended ride-height change is suitable for your setup (stand length, ergonomics, and handling balance may be affected)
- Set sag and preload for your rider weight and typical luggage/passenger use
- Record baseline adjuster positions before making changes so you can return to a known setup
Serviceability/Lifecycle
- As a pressurised, reservoir-style shock, periodic servicing helps maintain damping consistency and seal life
- Keep the shock clean around seals and adjusters to reduce wear and contamination during off-road use
Teknik Motorsport Pty Ltd Warranty terms for TracTive products.
This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.
Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.
Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.
When a claim is made under the warranty, the following conditions have to be met:
- You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
- The product has to be installed and adjusted as described in the instructions
- The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
- Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
- The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
- A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
- Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
- Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
| SKU | 46KT19-T5142-TR |
| Model # | 46KT19-T5142-TR |
| Barcode # | 46KT19T5142TR |
| Brand | TracTive Suspension |
| Shipping Weight | 5.0000kg |
| Shipping Size | 0.200 x 0.200 x 0.400m |
| Unit Of Measure | ea |
| Type | X-TREME |
If your Motorcycle is listed below, this product will suit:
| Position (Front or Rear) | Rear |
| Damping Adjustment Type | Rebound & Compression High + Low Speed |
| Shock Length Eye to Eye (mm) | 387 |
| Length Change (mm) | Raised +20mm |
| Spring Rate Standard | 95 N/mm |
| Type Code | X-TREME |
| Stroke Metal to Metal (mm) | 98 |
| Notes | PDSII anti-bottoming |
| Fitted Spring | 95-235 |
More From This Category
HiCalibre Fork Springs 43.8 x 460 Common Applicati
Proudly made in the USA(SKU: 19-197)
From
$245.00
48mm WP Stainless Steel Fork Seal Clip replaces W
fits all WP 48mm forks (SKU: 24-750-14)
$22.00
Techtool Fork Tube Tool & Cartridge Rod Holding Pl
For KYB, Showa & WP Twin or Open Chamber Forks(SKU: 93-032-00)
$220.00
HiCalibre Shock Spring 59 x 210 Common Fitment KTM
Proudly made in the USA(SKU: 20-049)
From
$345.00
KYB Suspension Tools Seal hammer 48mm
Original KYB Motorcycle Suspension Tool(SKU: 000.0673)
$128.81
Krooztune XPLOR Clamp Tool 6 and 12mm
Proudly made in Australia(SKU: KT-XPLORFF-TL)
$31.96
DRC Fork Seal Driver Set | Universal | 40-50mm
DRC Fork Seal Driver Tool Set(SKU: D59-26-005)
$177.09
Techtool Motorcycle Fork Seal Driver Kit 9pc Kit
35/36-39-41-43-45-46/47-48-49/50-54mm(SKU: 93-009-00)
$470.58
Kayaba (KYB) Genuine Parts Front Fork Service Kit
OEM KYB Japan Motorcycle Suspension Service Parts(SKU: 119994807001)
$175.32
Shock Seal Head Steel Bullet 4pc Kit
14x12 | 16x12 | 18x12 | 18x16 mm(SKU: 93-031-01)
$69.95
WP Reservoir Removal Tool - 2 Pin Type
Fits many WP Shocks from 1984 on(SKU: 93-046-00)
$55.00






