ZETA RACING SUSPENSION REAR SUSPENSION LOWERING KIT

ZETA RACING SUSPENSION REAR SUSPENSION LOWERING KIT SPECIFICATIONS:

- Low down your rear suspension without disassemble rear shock unit.

- Push down seal head from out side of damper, and install this kit to make 30 mm lowering your suspension with keeping its function.

- Make rear suspension fully extended length shorter, but not change length when the shock is shortened. Keep clearance between wheel and under fender even on lowering.

- Can be used with lowering link.

- Available 46 mm size for KYB / WP and 50 mm size for KYB / SHOWA / WP rear suspension

<iframe width="560" height="315" src="https://www.youtube.com/embed/5pICfLGkDGM" title="ZETA REAR SUSPENSION LOWERING KIT" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

SKU	ZE56-322
Brand	DRC Zeta Hardware
Shipping Weight	0.1000kg
Shipping Size	0.050 x 0.050 x 0.050m
Unit Of Measure	ea
Assembled Width	0.050m

See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Related products

Eibach EMS Moto Front Fork Spring Kit. 42.7 x 493 Showa 47mm USD CR CRF 125 250 450 Suzuki RMZ 250 450 Kawasaki KX250F

999 In Stock

Eibach EMS Moto Front Fork Spring Kit. 42.7 x 493

Made in the USA (QS9000) or Germany (ISO16949)(SKU: 978)

From $249.94

1mm Shock Lowering Stop Washer

1 In Stock

1mm Shock Lowering Stop Washer

(SKU: 30-002-20)

$35.27

Alloy Free Pistons All 2006+ KYB 48mm AOSS/SSS Forks - Sold In Pairs

41 In Stock

Alloy Free Pistons All 2006+ KYB 48mm AOSS/SSS For

(SKU: 30-004-13)

$110.00

DRC Zeta Fork Lowering Kit Inner

7 In Stock

DRC Zeta Fork Lowering Kit Inner

(SKU: ZE56-310)

From $160.00

KYB Factory Spring collar complete 28mm Factory Aluminium

4 In Stock

KYB Factory Spring collar complete 28mm Factory Al

Genuine KYB Factory Race Parts(SKU: 160190000101)

$103.32

KYB Factory Innertube KIT DLC 592mm x 45mm x 48mm KXF/KTM/CRF

4 In Stock

KYB Factory Innertube KIT DLC 592mm x 45mm x 48mm

Genuine KYB Factory Race Parts(SKU: 160174803001)

$447.21

KYB SSS 3 port Fork Piston Set

45 In Stock

KYB SSS 3 port Fork Piston Set

(SKU: 25-123-01)

$74.95

KoubaLink Lowering Link Suzuki RM/RMZ

3 In Stock

KoubaLink Lowering Link Suzuki RM/RMZ

Enhanced Control with Expert Engineering(SKU: KOUBALINK-RMZ)

From $295.00

More From This Category

Shock Spring Collar 52 x 55

2 In Stock

Shock Spring Collar 52 x 55

52mm id x 55mm od(SKU: 30-113-05)

$22.00

Xtrig Preload Adjuster KX250F 21-, KTM23 KYB Kit

1 In Stock

Xtrig Preload Adjuster KX250F 21-, KTM23 KYB Kit

Quickly adjust shock spring preload(SKU: 10301033)

$305.00

KYB Factory Stop ring rcu 64mm CRF450 09-16 KIT KTM16-22/Beta

120 In Stock

KYB Factory Stop ring rcu 64mm CRF450 09-16 KIT KT

Genuine KYB Factory Race Parts(SKU: 120156400101)

$4.74

Xtrig Preload Adjuster YZ250F 14-18, YZ450F 14-17

2 In Stock

Xtrig Preload Adjuster YZ250F 14-18, YZ450F 14-17

Quickly adjust shock spring preload(SKU: 10200005)

$279.95

K-Tech Shock Absorber Piston Bush 50.00x8.10x1.20mm -Sachs

4 In Stock

K-Tech Shock Absorber Piston Bush 50.00x8.10x1.20m

(SKU: PB-500812)

$36.95

Xtrig Shock Preload Adjuster Husky TC / TE / 449 / 511 *NLA*

1 In Stock

Xtrig Shock Preload Adjuster Husky TC / TE / 449 /

Quickly adjust shock spring preload(SKU: 10700001)

$330.00

Xtrig Preload Adjuster CRF250 18- ,CRF450R 17- STD/KIT

2 In Stock

Xtrig Preload Adjuster CRF250 18- ,CRF450R 17- STD

Quickly adjust shock spring preload(SKU: 10100004)

$330.00

Xtrig Preload Adjuster Triumph/Sherco KYB **Same as 10400002**

2 In Stock

Xtrig Preload Adjuster Triumph/Sherco KYB **Same

Quickly adjust shock spring preload(SKU: 10800001)

$365.00

40mm Adventure Bike Schrader Valve Bladder Conversion

56 In Stock

40mm Adventure Bike Schrader Valve Bladder Convers

Fits T700, DR650SE, Tuareg, Ducati Desert-X and More(SKU: 30-001-07)

$77.00

K-Tech Shock Absorber Piston Bush 40.00x11.50x1.20mm -KYB

2 In Stock

K-Tech Shock Absorber Piston Bush 40.00x11.50x1.20

(SKU: PB-40115120)

$36.95

K-Tech Shock Absorber Reservoir Bladder & END CAP ZF 4T 54.00mm

1 In Stock

K-Tech Shock Absorber Reservoir Bladder & END CAP

Beta Sachs ZF - Suits 4 stroke bikes(SKU: 211-900-054)

$100.95

Zeta DRC Rear Shock Preload Adjuster Joint

2 In Stock

Zeta DRC Rear Shock Preload Adjuster Joint

Quick preload adjustment by turning, not tapping!(SKU: ZE56-130-JOINT)

From $58.00

RCU PISTON BUSH 50.00x08.10x1.50mm Ohlins

818 In Stock

RCU PISTON BUSH 50.00x08.10x1.50mm Ohlins

(SKU: LFPB-500815)

$36.95

Xtrig Preload Adjuster KX450 2024-

1 In Stock

Xtrig Preload Adjuster KX450 2024-

Quickly adjust shock spring preload(SKU: 10300006)

$305.00

Shock Preload Adjuster KIT w/ clamp Shock WP Link KTM/Husky/GAS GAS

2 In Stock

Shock Preload Adjuster KIT w/ clamp Shock WP Link

(SKU: LOCK_RING-WPKIT)

From $176.00

K-Tech Shock Absorber Piston Bush 46.00x12.10x1.20mm -Sachs

1 In Stock

K-Tech Shock Absorber Piston Bush 46.00x12.10x1.20

(SKU: PB-461212)

$36.95

KYB Factory Gascap KIT 40mm complete YZ65 YZ85

2 In Stock

KYB Factory Gascap KIT 40mm complete YZ65 YZ85

Genuine KYB Factory Race Parts(SKU: 160114000201)

$94.81

Lainer Spring retainer shock WP Link 2023-2024

3 In Stock

Lainer Spring retainer shock WP Link 2023-2024

(SKU: WP2023_SPR_RETAIN)

$132.00

Non-Rebuildable Shock Regas Valve - Weld In

33 In Stock

Non-Rebuildable Shock Regas Valve - Weld In

Standard M5 Schrader Valve(SKU: 22-600-01)

$33.00

ZETA SHOCK END CAP | SHOWA 50mm | RED

1 In Stock

ZETA SHOCK END CAP | SHOWA 50mm | RED

(SKU: ZE56-12032)

$32.00

© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Teknik Motorsport Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Teknik Motorsport Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4/5 Harford St, JAMISONTOWN, NSW, 2750, AUSTRALIA. Our ABN is 29137380324. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

This privacy policy sets out how we use and protect any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

1. WHAT WE COLLECT

We may collect the following information:

name and job title
contact information including email address
demographic information such as postcode, preferences and interests
other information relevant to customer surveys and/or offers

2. WHAT WE DO WITH THE INFORMATION WE GATHER

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

Internal record keeping.
We may use the information to improve our products and services.
We may periodically send promotional emails about new products, special offers or other information which we think you may find interesting using the email address which you have provided.

3. SECURITY

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
We will not sell, distribute, lease or disclose your personal information to third parties (unless we are required by law to do so).
We may use your personal information to occasionally send you promotional information about our products and services which we think you may find interesting.
Should you wish to have your personal information removed or updated, or you would like to stop receiving advertising please CONTACT US.

4. HOW WE USE COOKIES

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

LINKS TO OTHER WEBSITES Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

5. CONTROLLING YOUR PERSONAL INFORMATION

You may choose to restrict the collection or use of your personal information in the following ways:

whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by CONTACTING US.