The Ohlins FKS211 NIX 22 fork cartridge kit is a front suspension upgrade for the BMW R nineT Scrambler and R nineT Urban G/S. It is designed to improve front-end control and feel, with more composed behaviour under braking and through corners. The NIX 22 layout provides a tunable damping platform suited to riders who want a more controlled and communicative front end.

Ohlins | Made to race, perfected to ride

Developed as a cartridge conversion for the standard fork, this kit focuses on improving damping quality and consistency to better match the chassis and tyre loads of the R nineT platform.

Who this cartridge kit is for

  • BMW R nineT Scrambler riders wanting improved braking stability and mid-corner feel
  • BMW R nineT Urban G/S riders chasing clearer front-tyre feedback on the road
  • Owners who want more adjustment range for personal setup preferences

Shock design & features

  • NIX 22 fork cartridge upgrade for the front suspension
  • Refined damping characteristics aimed at a more composed front end
  • Premium internal components for consistent performance

Tuning controls

  • Separate compression and rebound damping adjustments for precise tuning

Before you install

  • Fits BMW R nineT Scrambler and BMW R nineT Urban G/S front forks
  • Fork springs are sold separately and should be selected to suit rider preference and weight

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS211
Model # NIX 22
Barcode # FKS211
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 22
Fork Length (mm) 788.0
Stroke Metal to Metal (mm) 125.0
Product Family NIX 22
Notes Spring series 08429-xx
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category