The Ohlins FKS518 NIX 30 Street Fork Cartridge Front is a fork cartridge kit designed to improve front-end control and feel on the Yamaha MT-09 (FZ-09), Tracer 9, and XSR 900. It focuses on more consistent damping behaviour to support braking stability and mid-corner feedback. Adjustment is provided to help tailor the fork response to your riding conditions.

Ohlins | Made to race, perfected to ride

Ohlins fork cartridge kits are built to deliver predictable damping and clearer tyre contact feel. This upgrade is aimed at riders who want a more controlled, communicative front end without changing the character of the bike.

Who this cartridge kit is for

  • Riders looking for improved front-end feedback and confidence
  • Owners wanting better braking stability and corner support
  • Street riders who may also ride occasional track conditions

Shock design & features

  • NIX 30 Street fork cartridge kit
  • Designed for Yamaha MT-09 (FZ-09), Tracer 9, and XSR 900 applications
  • Premium internal components intended for consistent, durable performance

Tuning controls

  • Separate compression and rebound damping adjustments for fine tuning

Before you install

  • Professional installation is recommended to ensure correct assembly and setup
  • Confirm compatibility with your exact model and year before fitting

Serviceability/lifecycle

This cartridge kit is designed to be maintained and serviced as part of regular suspension upkeep, helping preserve consistent damping performance over time.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS518
Model # NIX 30 S
Barcode # FKS518
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30 S
Fork Length (mm) 757.0
Stroke Metal to Metal (mm) 130.0
Product Family NIX 30 Street
Notes 08423-xx spring series
Fitted Spring Sold separately. See notes.

Related products

More From This Category