The Ohlins FDK112 fork damping kit is designed to refine the front-end control of the Honda MSX 125 (Grom), MSX 125 (USA-Grom RR), and MSZ 125 (Monkey). It focuses on improving damping consistency to help the bike feel more composed under braking and through corners. With external adjustability, it supports a setup that can be tailored to your riding and tyre choice.

Ohlins | Made to race, perfected to ride

Developed around Ohlins suspension know-how, this front damping kit is intended to deliver clearer feedback and more predictable fork behaviour. The goal is better control without making the bike harsh or difficult to ride day to day.

Who this kit is for

  • Riders wanting stronger front-end support and feel from their MSX/MSZ platform
  • Street riders chasing improved stability under braking and mid-corner
  • Owners who want adjustable damping rather than a fixed “one-size” fork feel

Shock design & features

  • Fork damping kit format to upgrade the fork internals
  • Premium internal components aimed at consistent damping behaviour
  • Designed to improve front-end feedback and stability

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm model fitment: Honda MSX 125 (Grom), MSX 125 (USA-Grom RR), MSZ 125 (Monkey)
  • Installation involves fork work; professional fitting is recommended if you’re not experienced with suspension assembly
  • Plan to set sag and then fine-tune compression and rebound to suit your conditions

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FDK112
Model # FDK
Barcode # FDK112
Brand Ohlins
Shipping Weight 1.0000kg
Shipping Size 0.050 x 0.050 x 0.050m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Spring Rate Standard 5.5 N/mm
Type Code FDK
Stroke Metal to Metal (mm) 103.0
Product Family FDK 100
Notes Optional springs 68500-02 (4.5 N/mm) 68500-05 (6.0 N/mm) *Replaces FDK 107*
Fitted Spring 68000-04

More From This Category