The Ohlins FKS214 NIX 22 fork cartridge is designed to improve front-end control and feel on the Triumph Street Cup and Street Twin. It focuses on delivering a more composed response under braking and through corners. With separate damping adjustments, it supports a more tailored setup for your riding style and conditions.

Ohlins | Made to race, perfected to ride

Built around Ohlins suspension know-how, this cartridge kit is intended to deliver consistent damping behaviour and clear feedback at the handlebars. It’s a focused front-end upgrade for riders chasing better control without changing the character of the bike.

Who this cartridge kit is for

  • Triumph Street Cup and Street Twin riders wanting improved braking stability
  • Riders looking for stronger mid-corner support and front-tyre feel
  • Owners who want adjustability for spirited road riding and occasional track use

Shock design & features

  • Ohlins NIX 22 fork cartridge design
  • Premium internal components aimed at durability and consistent performance
  • Designed to improve front-end composure and communication

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment

Before you install

  • Confirm model fitment for Triumph Street Cup and Street Twin before installation
  • Installation should be performed by a qualified technician familiar with cartridge fork assemblies
  • After fitting, set up damping to suit your roads, tyres, and riding style

Need help choosing?

If you’re deciding between cartridge options or want guidance on initial settings for your Street Cup or Street Twin, we can help you match the kit to your riding and typical conditions.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS214
Model # NIX 22
Barcode # FKS214
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 22
Product Family NIX 22
Notes Spring series 08429-xx
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category