The Ohlins FKS512 NIX 30 Street Fork Cartridge kit is designed to improve front-end control and consistency on the Ducati Scrambler 1100 and Scrambler 1100 Special. It focuses on clearer feedback under brakes and a more composed feel through the middle of the corner. Damping is adjustable to help you tailor the bike to your riding conditions and preferences.

Ohlins | Made to race, perfected to ride

  • Cartridge fork kit designed for street use with the option of occasional track riding
  • Improves braking stability and mid-corner feel for a more communicative front end
  • Built around Ohlins internal components for consistent damping behaviour

Who this kit is for

  • Riders who want more confidence and feel from the front tyre on the road
  • Owners chasing better control during spirited riding without making the bike harsh
  • Scrambler 1100 / 1100 Special riders looking for a tuneable fork solution

Tuning controls

  • Separate compression damping adjustment
  • Separate rebound damping adjustment
  • Adjustment range intended to make setup changes straightforward and repeatable

Before you install

  • Fits Ducati Scrambler 1100 and Scrambler 1100 Special front suspension
  • Fork spring is sold separately
  • Professional installation is recommended to ensure correct assembly and setup

Need help choosing?

  • If you share rider weight, typical road conditions, and how you ride, we can help narrow down a suitable spring choice and baseline settings

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS512
Model # NIX 30 S
Barcode # FKS512
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30 S
Fork Length (mm) 784.0
Stroke Metal to Metal (mm) 150.0
Product Family NIX 30 Street
Notes 08423-xx spring series
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

Related products

More From This Category