The Ohlins STX 36 Blackline rear shock pair for Harley-Davidson FL Touring models is built to improve control and ride quality while keeping a classic look. Designed as a twin-shock rear upgrade, it suits riders chasing more consistent damping on real-world roads. This set offers external adjustments so you can tailor the feel for load, pace and surface conditions.

Ohlins | Made to race, perfected to ride

Ohlins suspension is developed with a focus on predictable damping behaviour and repeatable tuning. The Blackline finish is aimed at Harley-Davidson builds where performance needs to integrate with a darker, understated aesthetic.

Who this shock is for

  • Harley-Davidson FL Touring riders wanting a rear suspension upgrade with a factory-like appearance.
  • Owners who carry luggage or a passenger and need adjustment range to maintain stability and comfort.
  • Riders who want a more controlled rear end over bumps and through longer sweepers.

Shock design & features

This is a twin rear shock set from the Ohlins STX 36 Blackline family. It uses an emulsion-style layout rather than an external reservoir, prioritising a clean installation and straightforward packaging on touring Harley fitments.

Tuning controls

  • Rebound damping adjustment
  • Compression damping adjustment
  • Spring preload adjustment

Before you install

  • Confirm fitment for your exact Harley-Davidson FL Touring model and year.
  • Set spring preload for your normal load (solo, luggage, two-up) before fine-tuning damping.
  • After installation, re-check fasteners and clearances after the first ride.

Serviceability/lifecycle

Ohlins shocks are designed to be serviced to maintain damping performance over time. Routine inspection and periodic servicing help keep the shocks working consistently, especially on high-mileage touring use.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU HD771
Model # S36D (B)
Barcode # HD771
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.300 x 0.300 x 0.500m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear Twin
Shock Length Eye to Eye (mm) 305.0 / 12"
Spring Rate Standard 25.0 N/mm
Type Code S36D (B)
Stroke Metal to Metal (mm) 74.0 / 2.9"
Product Family STX 36 Blackline
Fitted Spring 00280-21
Spring Colour Black
Rec. Ohlins Oil 01309-

More From This Category