The Tractive X-PERIENCE fork cartridge kit for the Yamaha Tenere 700 replaces the fork’s internal damping components with a closed, pressurised cartridge system for more consistent control across changing conditions. The sealed, separated oil and gas design helps reduce cavitation and maintain stable damping when the fork is working hard. This kit is specified in a lowered configuration, reducing ride height for riders wanting an easier reach to the ground.

Who is this for?

  • Tenere 700 riders who want a more controlled, consistent front end feel on mixed surfaces
  • Riders prioritising comfort and predictability for adventure riding and touring
  • Anyone seeking a lowered ride height setup for confidence at stops and low-speed manoeuvres

Design & features

  • Fork cartridge conversion using a closed, pressurised architecture
  • Separated oil and gas system to help maintain damping consistency under demanding use
  • Built for serviceability over the product lifecycle

Tuning Controls

  • Dual-adjustable damping

Base Setup (factory preset)

This kit is supplied with a usable baseline setup intended to be dialled in to rider preference. After installation, establish a sensible starting point and then adjust damping in small steps to suit terrain, pace, and load.

Before You Install

  • Confirm this kit is the correct application for your specific Tenere 700 fitment before booking installation
  • Allow time for careful setup after installation, especially if you are changing ride height

Serviceability/Lifecycle

Tractive cartridge systems are designed to be maintained rather than discarded. Routine servicing helps preserve damping consistency and keep the sealed, pressurised internals operating as intended over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 26YA25-D2342-TR
Model # 26YA25-D2342-TR
Barcode # 26YA25D2342TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 915.0
Spring Rate Standard 6.0 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 200
Notes Hydraulic end-stop
Fitted Spring 6.0-370

Related products

More From This Category