The Tractive X-TREME fork cartridge kit for Ducati DesertX replaces the fork’s internal damping components with a closed, pressurised cartridge system for more consistent damping and improved control across changing conditions. The sealed cartridge architecture helps reduce cavitation and maintains more stable performance during long, demanding rides. This is a mechanical kit with rider-adjustable damping controls.

Design & features

This kit uses a drop-in cartridge design intended to deliver controlled oil flow through precision valving, improving front-end feel and support in mixed on-road and off-road use. The closed, pressurised layout is designed to keep damping more consistent when the fork is worked hard and oil temperatures rise.

Tuning Controls

External adjusters provide separate compression and rebound damping control, allowing you to fine-tune support, traction, and front-end response to match terrain and riding style.

Who is this for?

Suited to Ducati DesertX riders who want greater tuning range and more predictable fork behaviour for adventure riding, including touring with load, rough backroads, and off-road use where consistent damping matters.

Before You Install

  • Plan to set rider sag after installation to balance chassis attitude for your typical load and riding conditions.
  • Professional installation is recommended, as correct assembly, oil level, and initial settings are key to getting the best result.

Serviceability/Lifecycle

Tractive suspension components are designed to be serviceable and rebuildable, supporting routine maintenance and revalving over the life of the kit.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35DU21-D5306-TR
Model # 35DU21-D5306-TR
Barcode # 35DU21D5306TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 890.0
Spring Rate Standard 6.4 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 220.0
Notes Hydraulic end-stop
Fitted Spring 6.4-390

You May Also Like

Related products

More From This Category