The Tractive X-TREME Fork Cartridge Kit for the Triumph Tiger 800 XC replaces the stock fork internals with a matched, closed and pressurised 35 mm cartridge system. This architecture helps maintain consistent damping feel by reducing aeration and improving oil control through repeated strokes. The kit is designed as a complete internal damper solution rather than an external add-on.

Design & features

  • Closed, pressurised cartridge design to help stabilise damping behaviour and reduce cavitation.
  • Cartridge-based internal conversion intended to improve oil flow control and consistency across changing conditions.
  • 35 mm cartridge platform.

Tuning Controls

  • Dual-adjustable damping, providing separate control for compression and rebound.

Base Setup (factory preset)

  • Supplied with a baseline setup from Tractive intended as a starting point for tuning.

Who is this for?

  • Riders looking for more controlled fork behaviour on mixed road and off-road surfaces.
  • Owners who want wider tuning range through independent compression and rebound adjustment.

Before You Install

  • Professional installation is recommended, as fitting requires disassembly of the forks and correct setup of internal components.
  • After installation, allow time to dial in compression and rebound to suit load, tyres, and typical riding conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35TR11-D5302-TR
Model # 35TR11-D5302-TR
Barcode # 35TR11D5302TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 825.0
Spring Rate Standard 4.8 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 215.0
Notes Hydraulic end-stop
Fitted Spring 4.8-350

You May Also Like

More From This Category