The Tractive X-PERIENCE shock for the KTM 990 SM-R is a closed, pressurised monotube shock built around a sealed internal cartridge, designed to provide consistent damping over a wide range of road conditions. Its oil and gas are separated by an internal piston to help maintain damping stability during extended use. This configuration also supports predictable feel and control as conditions change.

Design & features

  • Closed, pressurised monotube design with oil/gas separation via an internal piston
  • Sealed internal cartridge architecture for consistent damping behaviour
  • Remote reservoir in a fixed mount configuration
  • Coil spring fitted

Tuning Controls

  • Triple-adjustable damping: separate compression and rebound adjustments are provided, with an additional damping adjustment circuit

Base Setup (factory preset)

The shock is supplied with a baseline setup intended as a starting point for road use. Fine-tuning can be done using the external adjusters to suit load, riding style, and surface conditions.

Before You Install

  • Confirm clearance and routing/position for the fixed remote reservoir before final fitment
  • Check overall spring and preload suitability for your usual load (solo, luggage, passenger)
  • After installation, re-check fastener torque and any hose/reservoir mounts after an initial ride

Serviceability/Lifecycle

As a closed, pressurised shock with a separated gas chamber, the design is intended to maintain damping consistency and can be serviced as part of normal suspension maintenance to keep performance stable over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT09-T4502-TR
Model # 46KT09-T4502-TR
Barcode # 46KT09T4502TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 372.0
Spring Rate Standard 140 N/mm
Spring Free Length (mm) 180
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 68.0
Fitted Spring 140-180

More From This Category