The Tractive X-PERIENCE shock for the BMW F 650 GS Dakar is a closed, pressurised monotube shock designed to deliver consistent damping over long distances. It uses a sealed internal gas/oil separation system to reduce fade and keep the damping behaviour stable as conditions change. This configuration focuses on controlled comfort and predictable response for everyday riding and touring.

Design & features

  • Closed, pressurised monotube design for consistent damping.
  • Internal gas/oil separation (not an emulsion layout) to help maintain performance during extended use.
  • Built around a robust, service-friendly architecture intended for long-term ownership.

Tuning Controls

  • Triple adjustable damping, allowing separate external control of rebound and compression circuits.

Base Setup (factory preset)

This shock is supplied with a baseline damping tune intended as a practical starting point for general road and mixed-use riding. Final settings should be refined to suit rider weight, load and typical terrain.

Who is this for?

  • BMW F 650 GS Dakar owners prioritising stable, repeatable damping for commuting and touring.
  • Riders who want broader external adjustability to tailor ride feel for different loads and surfaces.

Before You Install

  • Confirm motorcycle model fitment for the BMW F 650 GS Dakar before installation.
  • Set sag and adjust damping methodically after fitting to match your riding conditions.

Serviceability/Lifecycle

The sealed, pressurised monotube design is intended to be maintained over time with periodic servicing to keep performance consistent. Service intervals and required work depend on use, load and conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM00-T6518-TR
Model # 46BM00-T6518-TR
Barcode # 46BM00T6518TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 328.0
Spring Rate Standard 190 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 59.0
Fitted Spring 190-145

Related products

More From This Category