The Tractive X-TREME shock for the Yamaha Tenere 700 is a closed, pressurised rear shock built around a sealed cartridge layout. This architecture helps keep damping consistent by separating the damping circuit from external contamination and aeration, particularly when conditions and temperatures change. It is designed as a direct-fit replacement shock for the Tenere 700.

Design & features

  • Closed, pressurised shock design for more consistent damping behaviour in demanding use.
  • Sealed cartridge architecture intended to reduce the effects of aeration and maintain oil control.
  • Remote reservoir configuration.
  • Spring-equipped rear shock assembly.

Tuning Controls

  • Triple-adjustable damping: rebound and both compression circuits.
  • Hydraulic preload adjuster fitted for tool-free preload changes.

Who is this for?

  • Riders who want broad damping adjustability to suit mixed riding, varying loads, and changing terrain.
  • Tenere 700 owners who regularly alternate between solo and loaded setups and want easy preload changes.

Before You Install

  • Confirm model/year compatibility for your Tenere 700 before ordering.
  • Set sag and preload for your typical load, then fine-tune rebound and compression in small steps.

Serviceability/Lifecycle

  • As a pressurised shock with a reservoir, periodic servicing helps maintain damping quality over time.
  • Keep the adjusters clean and move them occasionally to prevent dirt build-up around the mechanisms.

Need Help Choosing?

  • If you’re unsure how much adjustability you need, base your choice on how often your load and riding conditions change and whether you want separate compression tuning control.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46YA25-T5542-TR
Model # 46YA25-T5542-TR
Barcode # 46YA25T5542TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 387.0
Spring Rate Standard 70 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 104
Notes PDSII anti-bottoming
Fitted Spring 70-235

Related products

More From This Category