The Tractive eX-PERIENCE shock for the BMW R 1200 GS Adventure is a 46 mm rear shock built around a closed, pressurised design that keeps damping performance consistent over long rides. It uses an oil/gas-separated architecture with a fixed reservoir, helping maintain control when conditions and temperatures vary. This model includes manual damping adjustment plus a remote hydraulic preload adjuster for practical load changes.

Design & features

  • Closed, pressurised shock design to reduce aeration and support consistent damping feel
  • Oil/gas separation via internal separation piston
  • Fixed reservoir layout
  • Supplied with a spring
  • Remote hydraulic preload adjuster fitted for quicker preload changes without tools

Tuning Controls

  • Manual dual damping adjustment (compression and rebound)
  • Remote hydraulic preload adjustment

Who is this for?

  • Riders who regularly vary luggage or passenger load and want easier preload changes
  • Touring and adventure use where heat stability and consistent damping are valued
  • Owners looking for a straightforward, manually adjusted rear shock setup

Before You Install

  • Confirm fitment for your exact BMW R 1200 GS Adventure model and year
  • Plan reservoir and adjuster placement so hoses/lines are not kinked or heat-affected
  • Set sag and baseline damping after installation to suit your load and riding conditions

Serviceability/Lifecycle

  • Designed as a rebuildable rear shock; routine servicing helps maintain damping quality over time
  • Keep preload and damping adjusters clean and free-moving, especially after wet or dusty rides

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM14-P4846-TR
Model # 46BM14-P4846-TR
Barcode # 46BM14P4846TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Type eX-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 410.0
Spring Rate Standard 160 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 91
Fitted Spring :160-205

More From This Category