The Tractive eX-PERIENCE shock for the BMW R 1200 GS Adventure is a 46 mm rear shock absorber built around a closed, pressurised damping system for consistent control on long-distance and mixed-surface riding. Its oil and gas are separated with an internal separation piston, helping maintain stable damping under sustained use. This unit includes a spring and a fixed hydraulic preload adjuster for convenient load changes.
Design & features
- Closed, pressurised shock design
- Oil/gas separation via internal separation piston (non-emulsion)
- 46 mm shock platform
- Spring included
- Fixed hydraulic preload adjuster fitted
Tuning Controls
- Rebound damping adjustment
- Hydraulic preload adjustment for setting sag and compensating for luggage or a passenger
Base Setup (factory preset)
This shock is supplied with a factory baseline tune. Use the preload adjuster to set sag for your load, then fine-tune rebound to suit your riding conditions.
Who is this for?
- BMW R 1200 GS Adventure riders wanting straightforward, adjustable control without external reservoirs
- Touring and adventure riders who regularly vary load (solo, luggage, two-up)
- Riders who prefer a pressurised, separated-gas design for consistent damping feel
Before You Install
- Confirm model fitment for your BMW R 1200 GS Adventure before installation
- Plan to measure and set rider sag after installation
- If changing spring rate for your load, ensure it is selected before final setup
Serviceability/Lifecycle
As a closed, pressurised shock with separated oil and gas, this unit is designed to be serviceable and maintain consistent performance with routine maintenance over its lifecycle.
Teknik Motorsport Pty Ltd Warranty terms for TracTive products.
This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.
Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.
Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.
When a claim is made under the warranty, the following conditions have to be met:
- You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
- The product has to be installed and adjusted as described in the instructions
- The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
- Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
- The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
- A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
- Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
- Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
| SKU | 46BM14-P4150-TR |
| Model # | 46BM14-P4150-TR |
| Barcode # | 46BM14P4150TR |
| Brand | TracTive Suspension |
| Shipping Weight | 5.0000kg |
| Shipping Size | 0.200 x 0.200 x 0.400m |
| Unit Of Measure | ea |
| Type | eX-PERIENCE |
If your Motorcycle is listed below, this product will suit:
| Position (Front or Rear) | Front |
| Damping Adjustment Type | Electronic and Manual |
| Damping Adjustment Type | Electronic & Compression High + Low Speed |
| Seat Height Change (mm) | Lowered -40 |
| Shock Length Eye to Eye (mm) | 384.0 |
| Spring Rate Standard | 55 N/mm |
| Type Code | eX-PERIENCE |
| Stroke Metal to Metal (mm) | 90.0 |
| Fitted Spring | 55-205 |






