The Tractive eX-PERIENCE Shock for the BMW R 1250 GS is a 46 mm rear shock built around a closed, pressurised, oil/gas-separated design with a separation piston. This architecture helps maintain consistent damping by keeping the oil under pressure and reducing aeration during long rides and varied conditions. It is supplied with a spring.

Design & features

  • Closed, pressurised shock design with oil/gas separation via a separation piston
  • Spring-equipped configuration
  • Tractive eX-PERIENCE series positioning for comfort and control-focused riding

Tuning Controls

  • Electronic plug-and-play adjustment
  • Remote reservoir in a fixed (piggyback-style) configuration

Who is this for?

  • BMW R 1250 GS riders wanting an electronically adjustable rear shock solution
  • Touring and day-to-day riders prioritising consistent damping feel over long distances
  • Owners looking for a modern pressurised design to help manage heat and oil aeration

Before You Install

  • Confirm model fitment for your specific BMW R 1250 GS variant and year range
  • Ensure your motorcycle is compatible with a plug-and-play electronic shock configuration
  • Check routing/clearance for the fixed remote reservoir location during installation

Serviceability/Lifecycle

  • Closed, pressurised shocks are serviceable and rely on correct oil and gas condition to maintain performance over time
  • Periodic inspection for leaks, wiring integrity (for electronic adjustment), and mounting hardware condition is recommended

Need Help Choosing?

  • If you’re unsure about electronic compatibility or fitment on your R 1250 GS, provide your exact model details so the correct configuration can be confirmed

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4829-TR
Model # 46BM18-P4829-TR
Barcode # 46BM18P4829TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.0
Spring Rate Standard 150 N/mm
Spring Option -2 130-205
Spring Option +1 160-205
Spring Option -1 140-205
Spring Option +2 170-205
Manufacturer Note 1 OEM mudguard (#33548532478) can be mounted
Damping System Separated oil/gas with reservoir
Rebound Adjuster Position Cable exit (0 deg)
Low-speed Compression Adjuster Position 12
High-speed Compression Adjuster Position 12
Spring Preload Setting 10 (EPA on min position)
Preload Adjustment Electro-hydraulic
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 150-205
Stroke Metal to Metal (mm) 83
Type Code eX-PERIENCE

You May Also Like

Related products

More From This Category