The Tractive eX-TREME Shock for the BMW M 1000 R is a closed, pressurised rear shock absorber built around a sealed cartridge architecture for consistent damping control. This version is configured in a lowered setup, reducing ride height by 20 mm. The internal gas pressure helps minimise cavitation and supports stable performance as conditions change.

Design & features

  • Closed, pressurised (oil/gas separated) design to help maintain consistent damping and reduce fade.
  • Sealed cartridge architecture for controlled oil flow and repeatable behaviour.
  • Lowered configuration: 20 mm reduction in ride height.

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

This shock is supplied with a baseline damping setup from Tractive intended to suit general road use as a starting point. Fine-tuning should be done in small steps to match tyre choice, load and riding conditions.

Who is this for?

  • Riders seeking a lowered rear ride height on the BMW M 1000 R.
  • Owners who want manual rebound adjustment for tailoring feel and control.
  • Those looking for a pressurised shock design aimed at consistent damping performance.

Before You Install

  • Confirm the lowered ride height suits your intended use and does not create clearance issues with your current setup.
  • After installation, check static sag and overall chassis balance to suit the new rear ride height.
  • Ensure all fasteners are tightened to the motorcycle manufacturer’s specifications.

Serviceability/Lifecycle

As a pressurised shock, periodic servicing helps maintain damping consistency over time. Service intervals depend on use and conditions; regular inspection for leaks and performance changes is recommended.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM20-P4536-TR-01
Model # 46BM20-P4536-TR-01
Barcode # 46BM20P4536TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 357.5
Length Change (mm) Lowered -20mm
Spring Rate Standard 60
Type Code eX-TREME
Stroke Metal to Metal (mm) 64.5
Fitted Spring :60-180

More From This Category