The Tractive eX-CHANGE PRO Shock for BMW F 900 XR is a complete replacement rear shock built around a closed, pressurised damping system for consistent control and reduced foaming under sustained use. It uses an oil/gas separated internal design rather than an emulsion layout. This model is supplied with a spring and includes a hydraulic preload adjuster for practical load changes.

Design & features

  • Closed, pressurised construction for stable damping behaviour across changing temperatures and long rides.
  • Oil and gas are separated internally (not an emulsion shock) to help maintain predictable response.
  • Built as a complete rear shock assembly with spring included.
  • Hydraulic preload adjuster fitted for easier adjustment when adding luggage or a pillion.

Tuning Controls

  • Dual-adjustable damping: rebound and compression adjustments are provided.
  • Spring preload adjustment via the hydraulic preload adjuster.

Who is this for?

  • BMW F 900 XR riders wanting a serviceable, tunable rear shock for everyday road use through to more demanding touring.
  • Riders who frequently change load and want quicker preload changes without tools.

Serviceability/Lifecycle

  • Designed as a rebuildable performance shock so wear items and oil can be serviced over the product’s life.
  • Pressurised architecture helps the shock stay consistent between services.

Before You Install

  • Confirm fitment for your exact BMW F 900 XR variant and model year before installation.
  • Set sag and damping to suit rider weight and typical load after fitting.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM20-P5145-TR
Model # 46BM20-P5145-TR
Barcode # 46BM20P5145TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE PRO
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic OEM to be re-used
Seat Height Change (mm) Factory Lowered -20
Shock Length Eye to Eye (mm) 383.0
Spring Rate Standard 160 N/mm
Type Code eX-CHANGE PRO
Stroke Metal to Metal (mm) 60.0
Notes PDSII anti-bottoming
Fitted Spring 160-160

You May Also Like

More From This Category