The Tractive X-PERIENCE rear shock for the BMW R nineT Scrambler uses a closed, pressurised damper design with a separated oil and gas system to help maintain consistent damping and reduce fade on longer rides. It’s built around a single shock body with a remote reservoir for improved oil control under sustained use. This model includes external adjustments so you can tailor support and comfort to your load and riding conditions.

Design & features

  • Closed, pressurised shock design
  • Separated oil and gas via internal separation piston
  • Remote reservoir layout
  • Coil spring fitted

Tuning Controls

  • Triple-adjustable damping: compression, rebound, and a second compression circuit

Base Setup (factory preset)

The shock is supplied with a baseline setup intended to be a sensible starting point. Fine-tuning can then be done using the external adjusters to suit rider preference, load, and road conditions.

Before You Install

  • Confirm fitment for your exact BMW R nineT Scrambler model and year.
  • Allow for the reservoir placement and hose routing during installation.
  • Set sag and damping after installation to match your rider weight and typical luggage or passenger use.

Serviceability/Lifecycle

As a pressurised, oil/gas separated shock, it is designed for consistent performance and periodic servicing. Routine inspection and scheduled maintenance help keep damping response stable over the life of the unit.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM21-T4341-TR
Model # 46BM21-T4341-TR
Barcode # 46BM21T4341TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Raised +70
Shock Length Eye to Eye (mm) 396.0
Spring Rate Standard 140 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 77.0
Fitted Spring 140-180

More From This Category