The Tractive X-PERIENCE shock for the BMW R nineT Racer is a closed, pressurised damper designed to improve control and consistency over long rides. Its internal architecture uses a sealed cartridge to keep the damping oil stable and reduce aeration under repeated hits. This unit is supplied with a remote reservoir to help manage oil volume and thermal stability.

Design & features

  • Closed, pressurised construction to maintain consistent damping feel as conditions change
  • Sealed cartridge architecture to help reduce foaming and keep damping response predictable
  • Remote reservoir design (hose-mounted) for improved oil management and heat handling
  • Spring-equipped shock

Tuning Controls

  • Triple adjustability for damping, providing broad control over how the shock responds across different ride conditions

Base Setup (factory preset)

This shock is supplied with a baseline setup from Tractive intended as a starting point. Fine-tuning is typically done to suit rider mass, load, and road conditions.

Who is this for?

  • BMW R nineT Racer riders wanting a more controlled, consistent rear end feel for road use
  • Riders who value tuning range for different loads and riding conditions

Before You Install

  • Confirm fitment for your exact BMW R nineT Racer variant and build year before installation
  • Allow for routing and mounting space for the remote reservoir hose and reservoir body

Serviceability/Lifecycle

As a pressurised, sealed-cartridge shock with a remote reservoir, this unit is designed to be maintained to keep performance consistent over time. Periodic servicing helps restore oil condition and internal wear items.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM17-T4316-TR-01
Model # 46BM17-T4316-TR-01
Barcode # 46BM17T4316TR01
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-PERIENCE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 370.0
Spring Rate Standard 140 N/mm
Type Code X-PERIENCE
Stroke Metal to Metal (mm) 51.0
Fitted Spring 140-180

More From This Category