The Tractive X-TREME shock for the Harley-Davidson Pan America 1250 is a closed, pressurised damper built around a sealed cartridge design to help maintain consistent damping and reduce oil aeration. This configuration is aimed at delivering stable performance across changing temperatures and long, rough rides. Based on the available product data, this shock includes triple damping adjustment for more precise set-up.

Design & features

  • Closed, pressurised shock design to help minimise cavitation and maintain damping consistency
  • Sealed cartridge architecture for controlled oil flow and repeatable performance
  • Built for the Harley-Davidson Pan America 1250 application

Tuning Controls

  • Rebound damping adjustment
  • Compression damping adjustment
  • Additional compression circuit adjustment (triple-adjustable configuration)

Base Setup (factory preset)

This shock is supplied with a baseline internal setting from the manufacturer. Final tuning depends on rider weight, load, tyres, and typical terrain, and should be set after installation.

Before You Install

  • Confirm fitment for your exact Pan America 1250 variant and intended use
  • Inspect mounting points and clearances before removal and installation
  • Plan time for sag and damping set-up after installation

Serviceability/Lifecycle

As a closed, pressurised unit with a sealed cartridge layout, servicing should be carried out by a qualified suspension technician with the correct tools and procedures to restore oil condition and gas pressure.

Is It Right For You?

Choose this option if you want broad, external tuning range via triple damping adjustment and the consistency benefits of a closed, pressurised shock design. If you prefer a simpler set-up with fewer external controls, a different configuration may be more suitable.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HD21-T7513-TR
Model # 46HD21-T7513-TR
Barcode # 46HD21T7513TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.0
Spring Rate Standard 100 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 89.0
Notes PDSII anti-bottoming
Fitted Spring 100-235

Related products

More From This Category