The Tractive X-TREME shock for the Husqvarna 701 ENDURO is a closed, pressurised rear shock built around a sealed cartridge architecture for consistent damping over long, rough rides. This design keeps the damping oil and gas managed under pressure to reduce fade and maintain control as conditions change. It is configured with external adjusters for precise setup without disassembly.

Design & features

  • Closed, pressurised shock design with sealed cartridge architecture for stable damping.
  • Oil/gas separation via an internal separation piston to improve consistency during sustained use.
  • Remote reservoir configuration.

Tuning Controls

  • Triple adjustability: rebound, compression, and a separate high/low-speed compression function.
  • Spring preload adjustment.

Base Setup (factory preset)

Delivered with a factory baseline tune intended as a starting point. Final settings should be confirmed for rider weight, load and typical terrain.

Who is this for?

  • Husqvarna 701 ENDURO riders who want broad tuning range for mixed on-road and off-road use.
  • Riders who value consistent damping feel on longer, more demanding rides.

Before You Install

  • Confirm fitment for your exact Husqvarna 701 ENDURO model and any existing linkage or ride-height changes.
  • Set sag and preload before fine-tuning rebound and compression adjusters.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HQ16-T9105-TR
Model # 46HQ16-T9105-TR
Barcode # 46HQ16T9105TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 401.0
Spring Rate Standard 75 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 101.0
Notes PDSII anti-bottoming
Fitted Spring 75-235

You May Also Like

More From This Category