The Tractive X-TREME rear shock for the Husqvarna Norden 901 is a closed, pressurised design built around a sealed cartridge to keep damping consistent and reduce aeration under demanding use. This model is supplied in standard height. It is designed to provide stable, controlled performance across changing loads and surface conditions without relying on external modifications.

Design & features

  • Closed, pressurised shock architecture with a sealed cartridge for consistent oil control
  • Remote reservoir with oil/gas separation via an internal piston to help maintain damping stability
  • Coil spring shock configuration

Tuning Controls

  • Triple-adjustable damping to independently tune rebound and both compression circuits
  • Hydraulic preload adjuster for tool-free spring preload changes

Who is this for?

  • Riders who want broad tuning range for mixed riding conditions
  • Owners who regularly adjust preload for luggage or passenger use
  • Those seeking a robust, serviceable rear shock solution for adventure riding

Before You Install

  • Confirm compatibility with your exact Norden 901 variant and year
  • Set sag and baseline adjusters after installation, then fine-tune one change at a time
  • Ensure reservoir hose routing and clearance are checked throughout suspension travel

Serviceability/Lifecycle

  • Designed to be serviceable as part of normal suspension maintenance
  • Closed, pressurised construction helps support consistent performance between services

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HQ22-T5307-TR
Model # 46HQ22-T5307-TR
Barcode # 46HQ22T5307TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 372
Length Change (mm) Standard Height
Spring Rate Standard 110 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 83
Notes PDSII anti-bottoming
Fitted Spring 110-205

More From This Category