The Tractive X-TREME shock for the KTM 1090 ADVENTURE R is a closed, pressurised damper built around a sealed cartridge architecture to keep damping consistent and reduce aeration under hard use. This model uses an internal separation piston rather than an emulsion layout, keeping the oil and gas separated for more stable control. It is configured with triple adjustment so you can tune how the rear of the bike reacts to different loads, speeds and terrain.

Design & features

  • Closed, pressurised shock with a sealed cartridge layout
  • Oil/gas separation via an internal separation piston (not an emulsion design)
  • Built to support consistent damping behaviour during long or demanding rides

Tuning Controls

  • Rebound damping adjustment
  • Compression damping adjustment with separate high- and low-speed control (triple-adjustable configuration)

Who is this for?

  • Riders who want more control over rear suspension behaviour for mixed-surface riding
  • Owners who regularly vary load (luggage or passenger) and prefer a shock with broader tuning range
  • Anyone setting up for different terrain where both compliance and support need to be tuned

Before You Install

  • Confirm exact model and fitment for your KTM 1090 ADVENTURE R before ordering
  • Plan to set sag and damping after installation to suit rider weight and typical load
  • If you are changing springs or overall setup, allow time to re-check geometry and clearance

Serviceability/Lifecycle

  • Closed, pressurised construction is designed to maintain damping consistency and is serviceable as part of normal suspension maintenance
  • Periodic servicing helps keep performance consistent as oil and seals age

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT15-T5323-TR
Model # 46KT15-T5323-TR
Barcode # 46KT15T5323TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 400.0
Spring Rate Standard 180 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 61.0
Notes PDSII anti-bottoming
Fitted Spring 180-205

You May Also Like

More From This Category