The Tractive X-CITE Shock for KTM 390 ADVENTURE is a closed, pressurised mono shock built around a separated oil and gas design for consistent damping control. It uses a spring-equipped layout and includes manual adjustments to help match the shock to your load and riding conditions. This model does not include electronic control.

Design & features

  • Closed, pressurised shock body with oil/gas separation (not an emulsion design) for stable damping performance
  • Spring-equipped configuration suited to adventure and mixed-surface use
  • External reservoir layout is fixed to the shock body (piggyback style)

Tuning Controls

  • Rebound damping adjustment
  • Spring preload adjustment

Base Setup (factory preset)

The shock is supplied with a baseline factory tune intended as a starting point, with adjustment range available to refine feel for rider preference, luggage, and terrain.

Before You Install

  • Confirm motorcycle model and fitment before installation
  • Set sag and preload after installation to suit rider weight and typical load
  • If you change tyre type, luggage, or riding conditions, plan to revisit rebound settings

Serviceability/Lifecycle

As a pressurised, separated oil/gas shock, it is intended to be serviced to maintain performance over time. Routine inspection and periodic servicing will help keep damping consistent.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT20-R1133-TR
Model # 46KT20-R1133-TR
Barcode # 46KT20R1133TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 308.0
Spring Rate Standard 150 N/mm
Spring Option -2 130-180
Spring Option +1 160-180
Spring Option -1 140-180
Spring Option +2 170-180
Damping System Emulsion oil/gas
Rebound Adjuster Position 10 (180 deg)
Spring Preload Setting 12
Preload Adjustment Mechanical
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 150-180
Stroke Metal to Metal (mm) 63.0
Type Code X-CITE

More From This Category