Fork Spring 38.5 x 580 x 6.0N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-60)
$140.00
Find your Bike:
The Spring Conversion Kit is a complete replacement cartridge assembly for your current WP AER43 Air Fork setup. It is designed to completely remove all the pneumatic system from your current WP Forks and replace it with a traditional preload adjustable coil spring and cartridge setup. Only one kit is required for a pair of forks
Parts included in the kit:
| KG | Spring Rate |
|---|---|
| 35-40 | 6.0 N/mm |
| 40-45 | 6.5 N/mm |
| 45-50 | 7.0 N/mm |
| 50-55 | 7.5 N/mm |
| 55-65 | 8.0 N/mm |
| 65-70 | 8.5 N/mm |
| 70 > | 9.0 N/mm |
These recommendations are a guide only as fork Springs are weight and speed dependent. For example a 44 kg A Grade Pro level rider falls into the 6.5 N/mm category but may well be better suited to a 7.0 N spring due to the much higher corner entry speed and the ability to hit large bumps at high speeds. Please note this guide is for rider weight without gear.
Also note we have had great results using one spring down for C level riders or absolute beginners on the 85cc machines. E.g. - 42kg rider running a 6.0 N/mm spring for a plusher ride.
For more accurate advice please contact us.
| SKU | KT-WPATS43 |
| Brand | Krooztune |
| Shipping Weight | 2.0000kg |
| Shipping Size | 0.050 x 0.050 x 0.050m |
| Unit Of Measure | ea |
| Type | Air to Spring |
If your Motorcycle is listed below, this product will suit:
Fork Spring 38.5 x 580 x 6.0N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-60)
$140.00
Fork Spring 38.5 x 580 x 7.0N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-70)
$140.00
Fork Spring 38.5 x 580 x 6.5N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-65)
$140.00
Fork Spring 38.5 x 580 x 7.5N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-75)
$140.00
Fork Spring 38.5 x 580 x 8.0N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-80)
$140.00
Fork Spring 38.5 x 580 x 8.5N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-85)
$140.00
Fork Spring 38.5 x 580 x 9.0N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-90)
$140.00
Fork Spring 38.5 x 580 x 9.5N/mm - Single
Made in The Netherlands to ISO 9001(SKU: 38.5-580-95)
$140.00
XT660Z Tenere - Suspension Only - Stage 1
Upgraded Fork & Upgraded Standard Shock(SKU: 13-660-11)
$1,200.00
Teknik Shock Spring 47x190 White HVA / KTM /GasGas
Made in The Netherlands to ISO 9001(SKU: 47-190)
From
$228.95
Krooztune WP35 Fork Flow Kit - KTM Group 65cc (Inc
Proudly made in Australia(SKU: KT-WPAER35FFK-65)
From
$419.95
Krooztune Supercross Spring Seat KYB 48mm / Showa
Proudly made in Australia(SKU: KT-SXFFSS)
From
$309.95
Lainer Compression Kit for WP 4CS Forks Pair
Italian-engineered Lainer Suspension compression kit(SKU: WP4CS-COMP-ADJ)
$264.00
KYB Factory Axle bracket KIT KTM/HVA 15-25 Right
Genuine KYB Factory Race Parts(SKU: 60012040)
$471.90
SDI Front Fork Spring Perches Holes (Pair) Showa 4
CRF250 450 2017- KX450 2019- RMZ450(SKU: SDETCV25-Set)
$261.95
Enzo Technica Works Fork Spring Tubes 24mm KYB
Can be used with 453 to 470mm long springs(SKU: ER-TFST-24)
$495.00
Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki
Proudly made in Australia(SKU: KT-XPLORFA2-17)
$595.00
Krooztune WP 48mm AER Air Fork to SFF Coil Spring
Proudly made in Australia(SKU: KT-WPATS48)
$529.95
Krooztune WP XPlor 48mm FA48 Fork Flow Adjuster Ki
Proudly made in Australia(SKU: KT-XPLORFA2-19)
$595.00
KYB Factory Carbon fiber outertube protection SET
Genuine KYB Factory Race Parts(SKU: 160150000102)
$157.30
Kayaba (KYB) Genuine Parts Spring Perch Bushing Ea
37mm od x 7mm tall - Steel(SKU: 24-006-13)
$38.50
KYB Factory Axle bracket KIT KTM/HVA 15-25 Left
Genuine KYB Factory Race Parts(SKU: 60012041)
$532.40
© 2026 Teknik Motorsport Pty Ltd. ABN: 29137380324. All rights reserved.