The Ohlins FCX101 STX 22 fork cartridge kit is designed to improve the feel and control of the front end on the KTM 85 SX. It focuses on delivering more consistent damping and clearer feedback through braking and corner entry. Adjustability is built in so you can tailor the fork response to your riding conditions.

Ohlins | Made to race, perfected to ride

Developed with Ohlins suspension know-how, this cartridge kit is intended to refine front-end behaviour without changing the character of the bike. The result is a more composed and communicative fork feel.

Who this kit is for

Suited to KTM 85 SX riders looking for improved front-end feedback, stability under braking, and more predictable control through corners. It’s aimed at riders who want practical tunability and repeatable fork performance.

Shock design & features

  • Cartridge-based fork upgrade for the KTM 85 SX
  • High-quality internal components intended to support consistent damping behaviour
  • Designed to improve braking stability and mid-corner feel

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment
  • Adjustability intended to help fine-tune feel and control to rider preference

Before you install

Confirm compatibility with your exact KTM 85 SX model and year before installation. Professional installation and setup are recommended to ensure correct assembly and reliable performance.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FCX101
Model # STX Cartridge kit MX
Barcode # FCX101
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code T22DR1C1
Stroke Metal to Metal (mm) 272.0
Product Family STX 22
Notes 08789-series springs *Replaced by FCX 0101*

More From This Category