The Ohlins FCX1301 TTX 22 fork cartridge kit is a front-end upgrade designed for select KTM off-road models. It replaces the internal damping components with Ohlins’ cartridge system to improve control and consistency through varied terrain. Built for riders who want clearer feel from the front tyre and more confidence under load.

Ohlins | Made to race, perfected to ride

Ohlins suspension systems are developed with a focus on damping control, repeatability and service support. The FCX1301 applies that approach to the front fork with a complete cartridge solution intended for demanding riding conditions.

Who this cartridge kit is for

  • KTM riders looking for improved front-end feedback and stability
  • Off-road and enduro riders wanting more composure through braking bumps and corners
  • Owners chasing a more tuneable fork without changing the entire fork assembly

Shock design & features

  • TTX 22 fork cartridge system for the front fork
  • Premium internal components aimed at consistent damping performance
  • Designed as a cartridge replacement to refine mid-corner feel and braking stability

Tuning controls

  • Separate compression and rebound adjustment to tailor damping feel
  • Adjustment range intended to support different rider preferences and conditions

Before you install

  • Confirm compatibility with your KTM model and year before fitting
  • Professional installation is recommended to ensure correct assembly and settings
  • Plan for a post-install check and fine-tune of clickers to suit your riding

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FCX1301
Model # T22DR1C1
Barcode # FCX1301
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code T22DR1C1
Fork Length (mm) 937.0
Stroke Metal to Metal (mm) 290.0
Product Family TTX 22
Notes 08765- spring series *Replaces FCX 0301* Use spacer 15564-05 for MY 2017-2018
Fitted Spring Sold separately, see notes.
Rec. Ohlins Oil 01330-

More From This Category