The Ohlins FGK221 NIX 30 fork cartridge kit is built to improve front-end control and feel on the Suzuki GSX-R 1000. It replaces key internal damping components to deliver a more composed and communicative response under braking and through corners. Designed for riders who want consistent performance with practical adjustability for different conditions.

Ohlins | Made to race, perfected to ride

Developed from Ohlins racing experience, the NIX 30 cartridge platform focuses on delivering predictable damping behaviour and clear feedback at the bars. The aim is confidence you can tune, rather than a one-size-fits-all feel.

Who this cartridge kit is for

  • Suzuki GSX-R 1000 riders chasing improved braking stability and mid-corner confidence
  • Spirited street riders who want better front-end communication
  • Occasional track day riders looking for more precise tuning control

Shock design & features

  • Ohlins NIX 30 front fork cartridge kit (FGK221)
  • Premium internal components designed for consistent damping performance over time
  • Refined damping character aimed at a stable, settled front end across varied riding conditions

Tuning controls

  • Separate compression and rebound adjustment for targeted changes to feel and support
  • Adjustability intended to suit both road and track-focused setups

Before you install

  • Professional installation is recommended to ensure correct assembly and setup
  • Plan a base setup check after install so damping adjustments are meaningful and repeatable

Need help choosing?

If you’re deciding between cartridges, springs, or a full fork upgrade path for your GSX-R 1000, confirm your current fork configuration and riding use so the setup matches your goals.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK221
Model # NIX 30
Barcode # FGK221
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30
Fork Length (mm) 723.0
Stroke Metal to Metal (mm) 120.0
Product Family NIX 30
Notes 08790-xx series spring
Fitted Spring Sold separately. See notes.

More From This Category