The Ohlins FGK117 NIX 30 fork cartridge kit is built to improve front-end control on the Kawasaki ZX-10R with a more settled, communicative feel. Designed for riders chasing cleaner feedback under braking and better support through the corner, it focuses on consistent damping behaviour. It suits both fast road use and track-focused riding where confidence at the front matters.

Ohlins | Made to race, perfected to ride

Ohlins suspension components are developed with a strong focus on damping control and rider feedback. This cartridge kit is designed to bring that approach to the ZX-10R’s front end while retaining practical adjustability for real-world tuning.

Who this kit is for

  • ZX-10R riders wanting improved feel and stability from the front fork
  • Riders who prioritise braking support and mid-corner composure
  • Owners looking for a more tunable setup for spirited street riding and track days

Shock design & features

  • NIX 30 fork cartridge kit design
  • Premium internal components intended to maintain consistent damping performance over time
  • Developed to enhance front-end feedback and braking stability

Tuning controls

  • Separate compression and rebound adjustments for targeted tuning
  • Adjustment range intended to support both road setup and track-oriented fine tuning

Before you install

  • Confirm compatibility for your exact Kawasaki ZX-10R model and year before fitting
  • Professional installation is recommended to ensure correct assembly and setup
  • Plan a baseline setup and then refine based on tyres, riding style, and conditions

Serviceability/lifecycle

As an Ohlins cartridge kit, the FGK117 is designed to be serviceable so performance can be maintained over time. Regular inspection and servicing helps keep damping feel consistent as use accumulates.

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK117
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate Standard 9.0 N/mm
Type Code NIX 30
Product Family NIX 30
Fitted Spring 04744-90

More From This Category