The Ohlins FGK230 NIX 30 fork cartridge kit is a front suspension upgrade for Yamaha MT-09 (FZ-09) and Tracer 900/Tracer 9 (FJ-09) models. It is designed to deliver improved control and stability at the front end with more consistent damping behaviour. This helps support a composed feel under braking and through corners for road riding and occasional track use.

Ohlins | Made to race, perfected to ride

Developed from Ohlins suspension know-how, the FGK230 cartridge kit focuses on increasing feel and confidence from the front tyre while maintaining predictable behaviour across changing conditions.

Who this cartridge kit is for

  • Riders wanting stronger front-end feedback and stability on the street
  • Owners who ride spiritedly and want more support under braking
  • Riders who also do occasional track days and want adjustability

Shock design & features

  • NIX 30 fork cartridge kit for the front forks
  • Premium internal components intended for consistent, reliable performance
  • Designed to improve braking stability and mid-corner feel

Tuning controls

The FGK230 provides separate compression and rebound adjustment, allowing you to tailor damping to suit your riding style and conditions.

Before you install

  • Confirm fitment for your exact Yamaha model and year before installation
  • Professional installation is recommended to ensure correct setup and function
  • After installation, allow time to fine-tune compression and rebound to preference

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK230
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front cartridge
Type Code NIX 30
Stroke Metal to Metal (mm) 137.0
Product Family NIX 30

More From This Category