The Ohlins FGK246 NIX 30 fork cartridge kit is designed to improve the front-end control and handling of the Suzuki GSX-8R. It focuses on delivering clearer feedback through the fork, with more composed damping behaviour under braking and through corners. The result is a front end that feels more settled and easier to tune to rider preference.

Ohlins | Made to race, perfected to ride

Ohlins cartridge kits are built around consistent damping control and adjustability. This kit is intended to help you get a more communicative and confidence-inspiring feel from the GSX-8R’s front suspension.

Who this cartridge kit is for

  • Riders wanting improved braking stability and front-end feedback
  • Spirited street riders looking for a more composed fork feel
  • Occasional track day riders who want practical tuning adjustment

Shock design & features

  • NIX 30 fork cartridge kit for the Suzuki GSX-8R
  • Premium internal components aimed at consistent damping performance over time
  • Improves mid-corner feel and overall front-end composure

Tuning controls

  • Separate compression and rebound adjustment to tailor the fork response
  • Designed to support straightforward tuning for road and track conditions

Before you install

  • Confirm compatibility with your exact Suzuki GSX-8R model and year before fitting
  • Professional installation is recommended to ensure correct assembly and setup

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGK246
Model # NIX 30
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Type Code NIX 30
Fork Length (mm) 745.0
Product Family NIX 30
Notes 08423-XX series
Rec. Ohlins Oil 01309-

More From This Category