The Ohlins FGR157 FGR 100 Complete Front Fork is a complete front fork assembly for the Suzuki GSX-R 1000, designed to deliver refined control and front-end confidence. It focuses on stable braking behaviour and clear mid-corner feedback through well-controlled damping and straightforward adjustability. Built for riders who want a composed, communicative front end for spirited road riding and occasional track use.

Ohlins | Made to race, perfected to ride

Developed as a performance-focused complete fork package, this unit aims to improve how the front tyre loads under braking and transitions through a corner. The result is more consistent feel at the bars and a chassis that’s easier to trust when pace picks up.

Who this fork is for

  • Suzuki GSX-R 1000 riders chasing more front-end stability under braking
  • Riders who want better mid-corner feel and clearer feedback from the front tyre
  • Spirited street riders and occasional track-day users looking for easier, more precise tuning

Shock design & features

  • Complete front fork assembly from the Ohlins FGR 100 family
  • Premium internal components intended for consistent damping performance and durability
  • Damping characteristics aimed at a composed and communicative front end

Tuning controls

  • Separate compression and rebound adjustment to support precise suspension tuning
  • Adjustability intended to make setup changes clear and repeatable for road or track conditions

Before you install

  • Confirm fitment for your specific Suzuki GSX-R 1000 model and year before installation
  • Plan to set sag and dial in compression/rebound after install to suit your riding and tyres
  • Have installation completed by a qualified technician if you’re not experienced with front-end work

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FGR157
Model # TTX25G
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate Standard 9.5 / 10.0 / 10.5 N/mm
Type Code TTX25G
Fork Length (mm) 735.0
Stroke Metal to Metal (mm) 125.0
Product Family FGR 100
Notes Springs -95,-10,-05 included in kit
Fitted Spring 04744-95/-10/-05

More From This Category