The Ohlins FKS223 NIX 22 fork cartridge kit is designed to improve front-end control and rider confidence on the Honda CB650F and CBR650F. It focuses on delivering consistent damping and clearer feedback through the handlebars. The result is a more composed front end under braking and when loading the tyre mid-corner.

Ohlins | Made to race, perfected to ride

Ohlins cartridge systems are built to bring higher-quality damping control to modern road bikes. This kit is aimed at riders who want more stability and feel without changing the character of the bike.

Who this kit is for

  • Riders chasing improved braking stability and front-end feedback
  • Spirited street riding with the option of occasional track use
  • Owners who want a more communicative and controlled fork action

Shock design & features

  • NIX 22 fork cartridge kit
  • Premium internal components intended to maintain consistent performance and durability
  • Refined damping characteristics to support stability and mid-corner feel

Tuning controls

  • Separate compression adjustment
  • Separate rebound adjustment
  • Tuning range suited to road riding and occasional track use

Before you install

  • Confirm compatibility with Honda CB650F / CBR650F before fitting
  • Correct installation and setup are important to achieve the intended feel and balance

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS223
Model # NIX 22
Barcode # FKS223
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 22
Stroke Metal to Metal (mm) 120.0
Product Family NIX 22
Notes Spring series 08429-xx
Fitted Spring Sold separately. See notes.
Rec. Ohlins Oil 01309-

More From This Category