The Ohlins FKS524 NIX 30 Street fork cartridge kit is designed to improve front-end control and consistency on the Indian FTR 1200 and FTR 1200 S. It focuses on delivering clearer feedback under braking and through mid-corner load changes. The result is a more composed, communicative front end for road riding with the option of occasional track use.

Ohlins | Made to race, perfected to ride

Built around Ohlins cartridge technology, this kit replaces the internal damping components to provide more stable and predictable front suspension behaviour. It is aimed at riders who want a refined feel without compromising day-to-day usability.

Who this kit is for

  • Indian FTR 1200 and FTR 1200 S riders chasing better front-end feel and control
  • Road riders who want improved confidence during spirited riding
  • Riders who occasionally do track days and want more consistent damping response

Shock design & features

  • Cartridge-style internal upgrade intended to improve braking stability and mid-corner composure
  • Refined damping characteristics for a more controlled, predictable front end
  • Premium internal components to support consistent performance over time

Tuning controls

  • Separate compression and rebound adjustment to fine-tune damping to your riding and tyres
  • Adjustability intended to support both street-focused setup and occasional track use

Before you install

  • Confirm compatibility with your exact model (Indian FTR 1200 / FTR 1200 S)
  • Professional installation is recommended to ensure correct assembly and baseline setup
  • After installation, allow time to dial in settings to suit your weight, roads and riding style

Öhlins Motorcycle Suspension Warranty

New Öhlins motorcycle shock absorbers, front forks and cartridge kits supplied by Teknik Motorsport are covered by the applicable Öhlins manufacturer’s warranty against defects in materials and workmanship.

Teknik Motorsport is an authorised Öhlins Service Centre and administers warranty claims in accordance with the Öhlins warranty conditions. The service intervals below form part of the maintenance requirements for Öhlins products supplied and supported by Teknik Motorsport.

This warranty is in addition to the consumer guarantees that apply under the Australian Consumer Law.

  • Registered motorcycles — non-competition road use Five years, subject to correct application, installation, setup and servicing every: 20,000 km or two years, whichever occurs first.
  • Registered motorcycles — adventure and light off-road use Five years, subject to correct application, spring rate, setup and servicing every: 10,000 km or annually, whichever occurs first.
  • Unregistered or competition motorcycles Two years for eligible Öhlins MX and Enduro products, subject to inspection every ten hours and servicing every: 30 operating hours or annually, whichever occurs first.

Compliance with the applicable service interval is a condition of the Öhlins manufacturer’s warranty. Evidence of servicing may be required when a warranty claim is assessed.

A seal leak, loss of damping performance or internal wear arising after the prescribed service interval has been exceeded will be treated as a service or maintenance issue rather than a manufacturing defect.

Warranty repairs

Öhlins suspension products are designed to be serviced and repaired. Where a warranty claim is approved, the normal remedy is repair of the customer’s original suspension unit using genuine Öhlins replacement parts.

Replacement of a complete shock absorber, fork or cartridge kit is not automatic and would normally occur only where the product has suffered a manufacturing failure that cannot reasonably be repaired. This is at Ohlins discretion. 

Öhlins spare parts and service kits

Öhlins spare parts, seals, bushes, service kits, springs, fluids and individual components are covered only against defects present when supplied.

No fixed age-based warranty applies to wear items, service parts or consumable components. Wear, deterioration, contamination, incorrect installation and damage caused by another component are not manufacturing defects.

Öhlins gives the customer a meaningful five-year warranty on products (Units), provided the suspension is maintained as suspension should be maintained. Teknik supports that warranty locally, can inspect the product properly, and can repair it with genuine parts rather than discarding it.

SKU FKS524
Model # NIX 30 S
Barcode # FKS524
Brand Ohlins
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.800m
Type Units
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Front cartridge
Spring Rate No Spring/s Supplied
Type Code NIX 30 S
Fork Length (mm) 748.0
Stroke Metal to Metal (mm) 120.0
Product Family NIX 30 Street
Notes 08423-XX Spring series, *Fits Sachs front fork with 120 mm travel*
Fitted Spring Sold separately, see notes.
Rec. Ohlins Oil 01309-

More From This Category