The Tractive X-TREME fork cartridge kit for the Triumph Tiger 800 XC replaces the internal damping components in your fork legs with a closed, pressurised cartridge system. This sealed architecture is designed to keep damping performance consistent and reduce aeration under demanding use. Fitment retains the external look of the forks while changing the way damping is generated and controlled internally.

Design & features

  • Closed, pressurised (sealed) fork cartridge architecture for consistent damping performance.
  • Cartridge-based internal damping system designed as a complete kit for the model listed.

Tuning Controls

  • Rebound adjustment.
  • Compression adjustment.

Is It Right For You?

  • Suited to riders who want broader, more precise control over fork behaviour via separate compression and rebound adjustment.
  • A practical choice if you ride across mixed surfaces and want damping consistency from a sealed, pressurised design.

Before You Install

  • Confirm exact model and year compatibility for your Tiger 800 XC before ordering.
  • Professional installation is recommended, as fork cartridge fitting involves disassembly and correct setup of damping components.

Serviceability/Lifecycle

  • Cartridge-based designs are intended to be serviceable; periodic maintenance helps keep damping consistent over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 35TR11-D5305-TR
Model # 35TR11-D5305-TR
Barcode # 35TR11D5305TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.900m
Unit Of Measure Set
Type X-TREME
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Front
Damping Adjustment Type Rebound & Compression
Seat Height Change (mm) Lowered -30
Spring Rate Standard 4.8 N/mm
Type Code X-TREME
Notes Hydraulic end-stop
Fitted Spring 4.8-330

You May Also Like

More From This Category