The TracTive eX-CITE + HPA for the BMW F700GS uses a closed, pressurised shock architecture with separated oil and gas to help maintain consistent damping and reduce aeration under demanding use. This model includes hydraulic preload adjustment, letting you change rear ride height attitude by altering spring preload to suit load changes without tools. It is built as a serviceable unit intended for long-term use.

Design & features

  • Closed, pressurised shock with separated oil/gas design to support stable damping behaviour
  • Hydraulic preload adjuster (HPA) for convenient preload changes when adding luggage or a passenger
  • Serviceable construction for maintenance over the product lifecycle

Tuning Controls

  • Rebound damping adjustment
  • Hydraulic preload adjustment (HPA)

Who is this for?

  • BMW F700GS riders who want quick, repeatable preload changes for varying loads
  • Owners who prefer a pressurised, separated oil/gas shock design for consistent damping feel

Before You Install

  • Confirm model fitment for your BMW F700GS year and configuration
  • Set sag and preload to suit your typical riding load after installation
  • Check clearance and routing for the hydraulic preload adjuster placement before final tightening

Serviceability/Lifecycle

  • Designed to be serviced to refresh oil and seals as part of routine suspension maintenance
  • Periodic inspection is recommended, especially if used in wet, dusty, or high-load conditions

Is It Right For You?

  • Choose this if you want rebound adjustment plus the convenience of HPA for frequent load changes
  • If you do not need quick preload changes, a non-HPA option may be simpler

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM13-S2533-TR
Model # Discontinued
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CITE + HPA
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 414.0
Type Code eX-CITE
Stroke Metal to Metal (mm) 65.0

You May Also Like

More From This Category

TracTive BMW R 1200 RS Rear Shock eX-PERIENCE Special Order

TracTive BMW R 1200 RS Rear Shock eX-PERIENCE

Rear | Standard Height | EPA(SKU: 46BM15-P4872-TR-02)

$3,995.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability