The Tractive eX-CHANGE PRO Shock for the BMW R 1250 GS is a closed, pressurised rear shock built around a sealed internal design to keep damping consistent and reduce aeration. This unit uses electronic control with plug-and-play fitment, integrating with the bike’s electronics for adjustment. Ride height is not changed on this configuration.

Design & features

  • Closed, pressurised shock construction to help maintain stable damping performance
  • Sealed architecture designed to keep oil and gas managed under load
  • Electronic plug-and-play integration for compatible BMW R 1250 GS applications
  • Coil spring rear shock assembly

Tuning Controls

  • Electronically controlled damping adjustment (plug-and-play)
  • No manual rebound or compression adjusters are specified for this variant

Before You Install

  • Confirm compatibility with your exact BMW R 1250 GS model and its electronic suspension system
  • Check clearance, routing, and connector condition during installation
  • Inspect existing mounting hardware and bushes and replace if worn

Serviceability/Lifecycle

  • Sealed, pressurised design is intended to support consistent performance over time
  • Plan periodic inspection for leaks, bushing wear, and electrical connector condition

Is It Right For You?

This shock suits riders who want an electronically integrated replacement shock that maintains standard ride height and prioritises consistent damping behaviour from a closed, pressurised design. If you’re chasing manual adjusters or a ride-height change, you’ll want a different configuration.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4129-TR
Model # 46BM18-P4129-TR
Barcode # 46BM18P4129TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE PRO
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic OEM to be re-used
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.0
Spring Rate Standard 150 N/mm
Type Code eX-CHANGE PRO
Stroke Metal to Metal (mm) 84.0
Fitted Spring :150-205

You May Also Like

More From This Category