The TracTive eX-PERIENCE + EPA rear shock for the BMW R1250GS Adventure (2018–2024) is a closed, pressurised shock absorber built around a sealed internal cartridge system for consistent damping and reduced oil aeration. This model includes an Electronic Preload Adjuster (EPA) and is supplied in a lowered configuration, changing rear ride height compared with standard length.

Design & features

  • Closed, pressurised shock design with a sealed cartridge architecture for stable damping behaviour.
  • External reservoir with an internal separation piston (oil and gas separated) to help maintain damping consistency.
  • Coil spring equipped.
  • Electronic Preload Adjuster (EPA) integrated for preload changes without manual tools.

Tuning Controls

  • Rebound damping adjustment.
  • Preload adjustment via electronic preload adjuster (EPA).

Before You Install

  • Confirm the lowered configuration suits your intended use, as it changes rear ride height.
  • Ensure your motorcycle’s electronic system connections and routing are correct for the electronic preload adjuster.
  • Check that the application matches BMW R1250GS Adventure model years 2018–2024.

Serviceability/Lifecycle

  • Designed to be serviceable as part of normal suspension maintenance to keep damping performance consistent over time.
  • Closed, pressurised construction helps manage oil aeration and supports predictable behaviour between services.

Is It Right For You?

  • Suitable if you want a rear shock with electronic preload adjustment and user-adjustable rebound damping.
  • A good fit when a lowered rear ride height is required for your setup.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4717-TR-01
Model # Discontinued
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE + EPA
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Lowered -50
Shock Length Eye to Eye (mm) 394.0
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 75.0

You May Also Like

More From This Category