The Tractive X-CITE shock for the Kawasaki KLE650 Versys uses a closed, pressurised damper design with oil and gas separated by an internal piston for consistent damping under sustained use. It features a coil spring and external adjusters to fine-tune behaviour to your load and riding conditions. This configuration is designed to keep performance stable as temperatures and pace vary.

Design & features

  • Closed, pressurised monotube construction with an internal separation piston (oil/gas separated) to help maintain consistent damping.
  • Coil spring shock suited to road and mixed-surface use where stability and control matter.
  • Built around an integrated damper body (no external reservoir specified for this configuration).

Tuning Controls

  • Rebound damping adjustment.

Base Setup (factory preset)

The shock is supplied with a baseline internal tune intended to work as a starting point for the model fitment. Final setup depends on rider mass, typical luggage/passenger use, and preferred ride feel, with rebound adjustment used to refine control.

Who is this for?

  • Riders who want a serviceable, pressurised shock design with stable damping characteristics.
  • Owners who carry varying loads and want the ability to adjust rebound to suit conditions.

Before You Install

  • Confirm compatibility with your exact KLE650 Versys variant and year range shown in your listing.
  • Plan to set sag and rebound after installation for your typical riding load.

Serviceability/Lifecycle

This is a rebuildable, pressurised shock architecture designed for periodic servicing to maintain damping performance over time. Service intervals and parts requirements depend on use conditions and kilometres.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KA15-R3508-TR
Model # 46KA15-R3508-TR
Barcode # 46KA15R3508TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Lowered -25
Shock Length Eye to Eye (mm) 293.0
Spring Rate Standard 200 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 48.0
Fitted Spring 200-160

More From This Category