The TracTive X-CHANGE Dynamic ESA rear shock for the BMW R1250GS is a closed, pressurised damper designed to work with the bike’s Dynamic ESA system. It uses a sealed internal cartridge architecture to keep damping consistent and reduce aeration under demanding conditions. This model is specified as a 50 mm lower version, changing ride height accordingly.

Design & features

  • Closed, pressurised shock design to help maintain stable damping by separating gas and oil.
  • Built to integrate with BMW Dynamic ESA electronics (plug-and-play fitment as supplied for this application).
  • TracTive X-CHANGE format for a complete rear shock replacement.
  • Lowered configuration: 50 mm reduction in ride height.

Tuning Controls

  • Electronic adjustment via the bike’s Dynamic ESA system.

Base Setup (factory preset)

The baseline damping and electronic control behaviour follow the Dynamic ESA strategy for the application. Final feel will depend on the bike’s selected ESA mode and the condition of related chassis components.

Before You Install

  • Confirm your model and year compatibility for BMW R1250GS (2018 onwards per the supplied product name/legacy data).
  • Account for the 50 mm lower ride height change, including side stand/centre stand suitability and clearance.
  • Inspect linkages and bearings during installation, as worn components can mask suspension performance.

Serviceability/Lifecycle

As a sealed, pressurised unit, correct servicing requires appropriate tools and procedures for pressurised dampers and electronics-safe handling. Service intervals and parts requirements should be based on use conditions and workshop inspection.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P1041-TR
Model # 46BM18-P1041-TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-CHANGE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic
Seat Height Change (mm) Lowered -50
Shock Length Eye to Eye (mm) 386.0
Type Code X-CHANGE ESA
Stroke Metal to Metal (mm) 68.0

You May Also Like

More From This Category

TracTive BMW R 1200 R Rear Shock eX-PERIENCE Special Order

TracTive BMW R 1200 R Rear Shock eX-PERIENCE

Rear | Standard Height | EPA(SKU: 46BM15-P4872-TR)

$3,995.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability
TracTive BMW R 1250 RS Rear Shock eX-PERIENCE Special Order

TracTive BMW R 1250 RS Rear Shock eX-PERIENCE

Rear | Standard Height | EPA(SKU: 46BM15-P4872-TR-03)

$3,995.00

Custom build by TracTive Netherlands for every order. Usually 6-8 weeks depending on component availability