The Tractive eX-PERIENCE Shock for BMW R 1250 GS is a closed, pressurised rear shock designed to improve control and consistency across changing loads and road conditions. Its sealed, oil/gas-separated architecture helps reduce aeration and fade during sustained use. This model includes external damping adjustment to fine-tune feel to your riding style.

Design & features

  • Closed, pressurised shock design for consistent damping behaviour
  • Oil and gas are separated internally to help maintain stable damping
  • Built as a complete replacement rear shock unit

Tuning Controls

  • Rebound damping adjustment
  • Spring preload adjustment

Base Setup (factory preset)

Supplied with a baseline setup intended to work as a starting point for general road and mixed-use riding. Use the adjusters to refine comfort, control, and stability for load, tyres, and riding conditions.

Who is this for?

  • BMW R 1250 GS riders wanting more consistent damping over long distances
  • Riders who vary luggage or passenger load and want adjustability to match
  • Owners who prefer a pressurised shock design for repeatable performance

Before You Install

  • Confirm fitment for your exact BMW R 1250 GS variant and model year before purchase
  • Inspect mounting hardware and linkages during installation and replace worn parts as needed
  • Set sag and then adjust rebound to suit your load and typical riding pace

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM18-P4817-TR
Model # 46BM18-P4817-TR
Barcode # 46BM18P4817TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type eX-PERIENCE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Electronic & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Electro-hydraulic
Seat Height Change (mm) Factory Lowered
Shock Length Eye to Eye (mm) 394.0
Spring Rate Standard 150 N/mm
Type Code eX-PERIENCE
Stroke Metal to Metal (mm) 75
Fitted Spring 150-205

Related products

More From This Category