The Tractive X-CITE shock for the BMW R 1150 GS is a pressurised, oil/gas-separated damper that uses a sealed cartridge-style architecture to keep damping consistent over long rides. It is designed as a complete replacement rear shock unit, supplied with a spring. This model is rebound adjustable to help you tailor ride control to your load and road conditions.

Design & features

  • Pressurised, oil/gas-separated design to reduce aeration and maintain consistent damping
  • Sealed internal cartridge-style construction for stable performance and durability
  • Supplied as a spring-equipped shock assembly

Tuning Controls

  • Rebound damping adjustment

Base Setup (factory preset)

The shock is supplied with a factory baseline tune intended to suit general road use. Rebound adjustment is provided so you can fine-tune feel and control without changing internal valving.

Before You Install

  • Confirm fitment for your BMW R 1150 GS and the correct mounting configuration before installation
  • Set sag and rebound after installation to match rider weight, luggage, and typical riding conditions

Serviceability/Lifecycle

As a pressurised, oil/gas-separated shock with a sealed cartridge-style internal assembly, periodic servicing helps maintain damping quality over time. Service intervals depend on use conditions and contamination exposure.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46BM99-R3102-TR
Model # 46BM99-R3102-TR
Barcode # 46BM99R3102TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 387.0
Spring Rate Standard 150 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 78.0
Fitted Spring 150-205

More From This Category