The TracTive Honda CRF300 L/Rally shock for 2021–on is a replacement rear shock absorber built around TracTive’s closed, pressurized internal design. This architecture keeps the damping oil under pressure to help resist aeration and maintain more consistent behavior during extended off-road and mixed-surface riding. It is supplied as a complete shock unit for the CRF300L/CRF300Rally application. While this shock is 40mm lower, the stiffer springs with less preload will retain the OEM height of the bike, if that's your preference. There is a full height model available.

Design & features

  • Rear shock absorber assembly for Honda CRF300L/CRF300 Rally (2021–on)
  • Closed, pressurised internal design to support consistent damping performance
  • Adjustable in rebound and spring preload

Tuning controls

Spring preload and rebound adjustment

Base setup (factory preset)

Setup will depend on rider load, terrain, and intended use.

Before you install

  • Verify compatibility with your exact model (CRF300L or CRF300 Rally) and model year 2021–on before installation.
  • If your bike is used with luggage or frequent passenger load, ensure the spring rate supplied matches your intended use (spring details are not included in the input data).

Serviceability/Lifecycle

Fully serviceable with all parts available. As with most performance shocks, periodic inspection and servicing may be required depending on operating conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO21-R3118-TR
Model # 46HO21-R3118-TR
Barcode # 46HO21R3118TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
Format Rear
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Seat Height Change (mm) Lowered -40
Shock Length Eye to Eye (mm) 398.0
Spring Rate Standard 90 N/mm
Manufacturer Note 2 Side and/or center stand might be too long
Spring Option -2 80-235
Spring Option Maximum 110-235
Spring Option +1 95-235
Spring Option -1 85-235
Spring Option +2 100-235
Manufacturer Note 1 Standard seat height (due to firmer spring rate)
Damping System Separated oil/gas
Rebound Adjuster Position 10 (90 deg)
Spring Preload Setting 13
Preload Adjustment Mechanical
Spring Type Linear, included
Piston Diameter (mm) 46
Suspension Unit Type Shock
Fitted Spring 90-205
Fitted Spring 90-235
Stroke Metal to Metal (mm) 84
Type Code X-CITE

Related products

More From This Category