The Tractive X-CITE Shock for the CFMOTO 450 MT is a closed, pressurised damper built around a sealed cartridge architecture for consistent damping and reduced aeration. This model is configured with rebound adjustment to let you fine-tune how the rear suspension returns after a bump. It uses an oil/gas separation piston layout rather than an emulsion design.

Design & features

  • Closed and pressurised construction to help maintain stable damping during sustained use
  • Sealed cartridge architecture for controlled oil flow and consistent performance
  • Oil and gas are separated by an internal piston to reduce foaming compared with emulsion designs

Tuning Controls

  • Rebound damping adjustment for tailoring return speed to load, tyres and riding conditions

Who is this for?

  • CFMOTO 450 MT riders who want a rebuildable, tuneable rear shock with external rebound adjustment
  • Riders who change load (luggage/passenger) or ride across mixed surfaces and want more control over setup

Before You Install

  • Confirm fitment for your exact CFMOTO 450 MT model and year before installation
  • Set sag and baseline rebound after installation, then adjust in small steps based on ride feedback

Serviceability/Lifecycle

  • Designed as a serviceable shock; periodic maintenance helps keep damping consistent over time
  • Inspect linkage bearings and mounting hardware during installation and servicing to avoid masking suspension issues

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46CF24-R2301-TR
Model # 46CF24-R2301-TR
Barcode # 46CF24R2301TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-CITE
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 350.0
Spring Rate Standard 95 N/mm
Type Code X-CITE
Stroke Metal to Metal (mm) 87
Notes PDSII anti-bottoming
Fitted Spring 95-180

Related products

More From This Category