The Tractive X-TREME Shock for the CFMOTO 450 MT is a closed, pressurised rear shock absorber built around a sealed, oil/gas separated damper to keep damping consistent over changing conditions. This unit uses an external reservoir layout and includes spring preload adjustment plus multiple damping adjustments. It’s designed as a complete replacement shock assembly for riders who want more control and tunability without relying on an emulsion-style design.

Design & features

  • Closed, pressurised damper design with separated oil and gas to support consistent damping feel.
  • External reservoir configuration to manage oil volume and heat more effectively than a single-body emulsion layout.
  • Supplied as a complete shock absorber assembly for the CFMOTO 450 MT.

Tuning Controls

  • Triple-adjustable damping (rebound plus two compression circuits).
  • Spring preload adjustment via a hydraulic preload adjuster.

Base Setup (factory preset)

This shock is supplied with a factory baseline tune intended to be a safe starting point for typical mixed riding. From there, the damping adjusters and hydraulic preload adjuster allow you to tailor feel for load, tyres, terrain and riding pace.

Who is this for?

  • CFMOTO 450 MT riders who carry varying loads (luggage or a pillion) and want easy preload changes.
  • Riders who want broad adjustability to tune comfort and control across different surfaces.
  • Anyone prioritising a pressurised, oil/gas separated shock architecture rather than an emulsion design.

Before You Install

  • Confirm your exact model fitment for the CFMOTO 450 MT before installation.
  • Set sag and preload for your normal riding load before fine-tuning damping.
  • If your current shock has any height change provisions, confirm whether your setup requires maintaining standard ride height.

Serviceability/Lifecycle

As a sealed, pressurised shock with an external reservoir, this unit is intended to be serviceable as part of normal suspension maintenance. Regular servicing helps keep oil condition, seals and nitrogen pressure within spec so adjustments remain effective over time.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46CF24-T9102-TR
Model # 46CF24-T9102-TR
Barcode # 46CF24T9102TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Length Eye to Eye (mm) 358
Length Change (mm) Raised +25mm
Spring Rate Standard 95
Type Code X-TREME
Stroke Metal to Metal (mm) 90
Notes PDSII anti-bottoming
Fitted Spring :95-205

More From This Category