The TracTive X-TREME Shock for KTM 890 ADVENTURE (S) is a closed, pressurised rear shock built around a sealed cartridge design to keep damping consistent and reduce aeration in demanding use. This version is supplied in a raised configuration with a +40 mm height change. It uses a remote reservoir layout to support stable oil management under sustained load.

Design & features

  • Closed, pressurised construction for more consistent damping and reduced fade.
  • Sealed cartridge architecture designed to keep oil and gas control stable over time.
  • Remote reservoir configuration to support oil/gas separation and heat management.

Tuning Controls

  • Rebound damping adjustment.
  • Compression damping adjustment.
  • Preload adjustment via hydraulic preload adjuster (remote).

Who is this for?

  • Riders who want external rebound and compression control for tuning to load, tyres, and conditions.
  • Owners who regularly change luggage or passenger load and want hydraulic preload adjustment for easier setup changes.
  • Those seeking a raised rear ride height setup (+40 mm) for their intended use.

Before You Install

  • Confirm the bike model is KTM 890 ADVENTURE (S) and that a +40 mm ride height change suits your chassis geometry and practical needs.
  • Plan routing and mounting for the remote reservoir and remote preload adjuster before final fitment.

Serviceability/Lifecycle

  • Closed, pressurised shocks are designed to maintain damping consistency; periodic servicing is still part of normal lifecycle care.
  • Keep external adjusters clean and free-moving to preserve usability and prevent damage.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46KT19-T5341-TR-04
Model # 46KT19-T5341-TR-04
Barcode # 46KT19T5341TR04
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Shock Length Eye to Eye (mm) 380
Length Change (mm) Raised +40mm
Spring Rate Standard 110 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 91
Notes PDSII anti-bottoming
Fitted Spring 110-205

More From This Category