The Tractive X-TREME Shock for the Ducati DesertX Rally is a 46 mm rear shock absorber built around a closed, pressurised design to help maintain consistent damping under demanding conditions. It uses an oil/gas separation piston architecture rather than an emulsion layout, supporting stable performance across longer, harder rides. This model includes a spring and a fixed hydraulic preload adjuster for practical load and ride-height management.

Design & features

  • Closed, pressurised shock design for consistent damping control
  • Oil/gas separated using an internal separation piston (not an emulsion shock)
  • Supplied with spring
  • Fixed hydraulic preload adjuster fitted for quicker preload changes without tools

Tuning Controls

  • Triple-adjustable damping: rebound plus both compression circuits
  • Manual adjustments (no electronic control listed for this model)

Who is this for?

  • Riders who want broader damping control for varying surfaces and luggage/passenger loads
  • Owners who prefer external preload adjustment for faster setup changes
  • Ducati DesertX Rally riders looking for a serviceable, performance-oriented rear shock solution

Before You Install

  • Confirm model fitment for your Ducati DesertX Rally before ordering
  • Set sag and preload first, then fine-tune rebound and compression to suit your load and riding conditions
  • Ensure correct spring rate selection for your weight and typical cargo

Serviceability/Lifecycle

  • Designed to be maintained and reconditioned as part of normal suspension lifecycle service
  • Closed, pressurised construction and separated oil/gas layout support repeatable performance between services

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46DU24-T5512-TR
Model # 46DU24-T5512-TR
Barcode # 46DU24T5512TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
Format Rear
See our Shipping Information See our Frequently Asked Questions

If your Motorcycle is listed below, this product will suit:

Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Raised +15
Shock Length Eye to Eye (mm) 371.0
Spring Rate Standard 85 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 107
Notes PDSII anti-bottoming
Fitted Spring 85-205

More From This Category