The Tractive X-TREME shock for the Honda CRF1000L Africa Twin Adventure Sports is a closed, pressurised 46 mm rear shock designed around a sealed cartridge architecture. The pressurised design helps maintain consistent damping and reduces the chance of oil aeration during extended or rough riding. This model includes a remote reservoir and a hydraulic preload adjuster for tool-free spring preload changes.

Design & features

  • Closed, pressurised shock construction for more stable damping behaviour under demanding use
  • Sealed cartridge architecture to support consistent oil control
  • Remote reservoir layout to support thermal stability during prolonged riding
  • Hydraulic preload adjuster for convenient preload changes without disassembly

Tuning Controls

  • Triple adjustment: rebound damping, plus compression damping with separate high- and low-speed circuits
  • Hydraulic preload adjustment for rider/passenger/luggage changes

Base Setup (factory preset)

This shock is supplied with a baseline factory setting intended as a starting point. Fine tuning should be completed to suit rider mass, load and typical terrain.

Before You Install

  • Confirm model fitment for your CRF1000L Africa Twin Adventure Sports before installation
  • Plan access and routing for the remote reservoir and hydraulic preload adjuster controls
  • After installation, set sag and then adjust damping in small steps to match your riding conditions

Serviceability/Lifecycle

As a pressurised, sealed-cartridge shock, periodic servicing helps maintain performance and oil condition over time. Service intervals depend on use, terrain and operating conditions.

Teknik Motorsport Pty Ltd Warranty terms for TracTive products.

This TracTive product has been assembled with the utmost care and tested according to ISO9001:2015 Quality system. In the unlikely event that the product does not fulfill your expectations because of faulty materials or manufacturing errors, please contact us through your dealer.

Teknik Motorsport Pty Ltd warrants that if, within 24 months of the date of sale the product is found to be defective as a result of manufacturing errors or faulty components, the product will be repaired free of charge by us, or by a TracTive approved repairer at our discretion.

Warranty covers the direct service material cost, service labour cost ($80/hr AUD) and shipping costs of the service partner. Other costs will be regarded on a case by case basis by Teknik Motorsport and TracTive.

 When a claim is made under the warranty, the following conditions have to be met:

  • You must have read the instructions carefully before mounting the product in the vehicle or adjusting the product.
  • The product has to be installed and adjusted as described in the instructions
  • The product must have been maintained and serviced in accordance with the recommendations in the manual. If not described in the manual, the recommended service intervals for regular street use: every 30.000 km or max 2 years, whichever is earlier.
  • Warranty shall apply only when TracTive original parts, procedures and tools have been used to service and/or repair, and if service and repair is performed by designated TracTive partners.
  • The product may not have been neglected, improperly used, altered or subjected to excessive loads. Excluded from warranty are normal wear, damage and rust.
  • A sales receipt or other proof of purchase originally eminating from Teknik Motorsport Pty Ltd. No warranty will be given on TracTive or Touratech products not purchased from or through Teknik Motorsport pty ltd.
  • Excluded from warranty are in particular products which are used in vehicles that are intended or suitable for taking part in sporting events, or have actually been used this way.
  • Recommended service interval for Motorsport applications: every season, or every 50 hours, every 10.000km or after any perceived loss in performance.
SKU 46HO18-T5512-TR
Model # 46HO18-T5512-TR
Barcode # 46HO18T5512TR
Brand TracTive Suspension
Shipping Weight 5.0000kg
Shipping Size 0.200 x 0.200 x 0.400m
Unit Of Measure ea
Type X-TREME
See our Shipping Information See our Frequently Asked Questions
Position (Front or Rear) Rear
Damping Adjustment Type Rebound & Compression High + Low Speed
Shock Options - Hydraulic Preload Adjuster Hydraulic with knob
Seat Height Change (mm) Standard Height
Shock Length Eye to Eye (mm) 402.0
Spring Rate Standard 90 N/mm
Type Code X-TREME
Stroke Metal to Metal (mm) 113.0
Notes PDSII anti-bottoming
Fitted Spring 90-235

You May Also Like

Related products

More From This Category